MAC'S Vertical Home Lift PL - 50 PL-72 Specifications Wheelchair Elevator for School, Porch, Mobile Home, Residential, Commercial, Church - American Disabilities Act - ADA - Handicap Elevators

World's Lowest Prices
1-800-477-0248.

MAC'S Vertical Home Lift PL-50 PL50 PL72 Porch School Mobile Church Residential Commercial building, matress, mobility Description of Product - MAC'S Vertical Home Lift PL-50 PL-72

The product described herein, manufactured by Mac's Lift Gate Inc., Long Beach, CA, is a precision vertical platform lifting device consisting of a machine tower with lifting platform, selected and dimensioned to provide adequate lifting height to suit the residential building requirement. The lift is capable of being used indoors and outdoors to vertically transport a wheelchair user or otherwise mobility-impaired person, up and over a low-rise barrier created by stairs, thus creating access to or within the building. Quality Assurance Manufacturing - MAC'S Vertical Home Lift PL-50 PL-72

A company with not less than forty (40) years of experience in the design, fabrication and installation of specialized lifting equipment for handicapped and geriatric consumers should supply the lift. Performance Requirements - MAC'S Vertical Home Lift PL-50 PL-72

The unit shall be assembled and pre-wired (less optional equipment and necessary gates) and manufactured with adequate lifting and load capacity for application described elsewhere in this specification.
The unit shall be easy to operate by the user or attendant, and shall be capable of functioning in all weather conditions.
The unit shall have the capacity to lift up to 500lbs. to the desired lifting height up to a maximum lift height of 50 inches (4 feet 2 inches) and 72 inches (6 feet). Composition of Materials - MAC'S Vertical Home Lift PL-50 PL-72

Machine tower: 14 gage cold rolled steel.
Base frame: 1 1/2" square x 3/16" wall structure steel tubing.
Lift weldment: 1 1/2" x 3" x .188" wall structure steel tubing.
Tower cap: 10 gage cold rolled steel plate
Side Guard Panels: 20 gage cold rolled steel sheet panel, 1" square x .120" .083" gauge steel tubing (frame).
Platform: 14 gage cold rolled steel plate with slip resistance surface.
Access ramp: 11 gage steel steel plate with slip resistance surface.
Electrical box: 16 gage galvanized steel
Switch box: Hi-impact A.B.S. Thermoplastic instrument case.
Limitations: Vertical platform lift shall operate both indoors and out, and must be anchored on a level, 4" thick, 3500 psi reinforced concrete surface or pad. Electrical System Wiring - MAC'S Vertical Home Lift PL-50 PL-72

The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gage Ul-cSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduit. Powder Coat Finish Prep, Primer, Powder Coat Process - MAC'S Vertical Home Lift PL-50 PL-72

1. 3 Stage wash, soapy water, clear water, and Iron Phosphate which is applied to parts.
2. Parts are inspected and scuffed
3. Epoxy Primer is applied
4. Parts are baked at 250 degrees for 15 minutes
5. Parts are inspected and scuffed if needed
6. Huebert O'Brian Powder-TGIC Polyester
7. Mixed with Paint, Color Almond PFT-500-S8
8. Powder Coat is applied and baked at 400 degrees for 30 minutes
9. Parts are inspected and scuffed if needed Saftey Devices

The unit shall have the following safety features for protection of users and the general public:

• Upper and lower limit switches
• Final limits switch
• Instant Reverse Motor
• Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp
• Grounded electrical system
• Heavy duty worm drive gear box with heavy duty #50 lifting chain
• Automatic access ramp
• 36" solid sides on non-enter and exit sides of platform
• Non-Skid platform and access ramp surface
• Key-lock control
• Emergency stop switch on main platform control
• Platform safety pan to stop decent of platform if obstruction is encountered
• 3" locking top and bottom landing gates provided with mechanical G.A.L. interlock
• Switching Control system 24 VAC low voltage current

The contractor shall do all work and supply all materials necessary for the complete installation. It is the intent of this specification to outline boradly the equipment required but not to cover the details of design and construction. Maintenance - MAC'S Vertical Home Lift PL-50 PL-72

Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty - MAC'S Vertical Home Lift PL-50 PL-72

Unit shall have one (1) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note:

This specification has been written to assist you and your consumer in preparing an accurate and detailed descsription for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department.

MAC'S Vertical Home Lift PL-50 PL-72 Specifications Wheelchair Elevator for School, Porch, Mobile Home, Residential, Commercial, Church - Handicap American Disabilities Act
WorldsLowestPrices
800-477-0248